RP50 (discontinued)

Rp50 large
Larger Images

Meet the incredibly feature-packed RP50. Our engineers built the RP50 with the great tone and effects you expect from DigiTech®, including award-winning amp, cabinet and pick-up modeling and an arsenal of studio-quality effects. They didn't skimp on the processing either. The RP50 uses our AudioDNA™ DSP chip to ensure that both modeling and effects are world-class. Plus 24-bit A/D/A conversion so that no frequency response is lost between inputs and outputs.

And when we weren't looking, our engineers even snuck in a drum machine with 30 patterns and an easy-to-use 13-LED array tuner. Then we made sure that the RP50's user interface was so simple a drummer could operate it (well most drummers, anyway).

If you've drooled over our bigger RP Series models but didn't have that much cash in your jeans, get on down to your DigiTech dealer and score an RP50.



Input 1/4" input
Output 1 - 1/4" Stereo TRS (can be used as a headphone output)
A/D/A 24 bit Delta Sigma
Power Supply 6 AA Batteries or DigiTech PS200R (9VDC) power supply
Power Consumption 5 Watts Maximum (w/ optional PS200R power supply)
Battery Life >15 hours with continuous useage
Preset Memory 40 User/40 Factory Presets
Effects Pickup Simulator,Wah, Compressor, 11 Amp Models,Acoustic Guitar Simulator, 3 band EQ, Noise Gate, Cabinet Modeling, Chorus, Flange, Phaser,Tremolo, Panner, Vibrato, Rotary Speaker,Auto Ya™, Envelope Filter, Pitch Shift, Detune,Whammy™, Delay, and Reverb
Drum Machine 30 Patterns
Simultaneous Effects up to 8
Dimensions 6" L x 5" W x 2.125"H
设备重量 0.85 lbs (1.85 lbs. w/ power supply)




How do I change the tempo on the drum patterns?
Press the DRUMS button. Then press the EDIT/EFFECT buttons until the small red LED light is on TEMPO at the right side of the RP50. Now use the VALUE buttons to increase or decrease the tempo.
How do I adjust the Tempo of the drum machine?
Press the Drums button. Press the Edit/Effect button until the red LED light
is on the Tempo category. Use the Value/Master Volume buttons to adjust the
Can the tuning reference be changed for a 1/2 step below?
When the Tuner is enabled, you can change your tuning reference.The default factory

setting is A=440 Hz. (displayed as 40). Press the Value Buttons to select alternate dropped

tunings. Alternate tunings are A = Ab (displayed as Ab),A = G (displayed as G), and A = Gb

(displayed as Gb).The display window briefly flashes the selected tuning preference. Exit

tuner mode by pressing either Footswitch. The tuning reference is retained when the unit is

turned off.
What is the reset for the RP50?
Power up while holding the Left Edit /Effect button. When two horizontal lines appear in the display, let go of the arrow button. Then press and release the STORE button.
How do I change the tempo of the drums?
Try the reset described in the owner's manual,
then press the DRUMS button, then use the EDIT/EFFECT buttons to get to
the PATTERN category on the right side of the pedal, then use the
VALUE/MASTER VOLUME buttons to change the pattern.

RP50 (discontinued)




Also available from worldwide distributors.